The use specification of corrugated compensator is the key to ensure that it can operate safely and efficiently in various application environments. Here are some basic usage and installation specifications based on previously provided information and combined with industry standards and best practices:
Pre-installation inspection
Confirm model and specification: Ensure that the model, specification and pipe configuration of the corrugated compensator meet the design requirements.
Check product quality: Check the appearance of the corrugated compensator to ensure that there is no damage, no corrosion, no crack and other defects.
Installation process
Directionality confirmation: For compensators with inner sleeves or hinges, it must be ensured that their direction is consistent with the direction of media flow, and the hinge rotation plane should be consistent with the displacement plane.
Pre-deformation process: If pre-deformation (cold compensation) is required, the auxiliary components used for pre-deformation should be removed after the pipe installation is completed.
Avoid improper adjustments: It is strictly prohibited to use the deformation of the corrugated compensator to adjust the deviation of pipeline installation, in case it affects its normal function and service life.
Prevent mechanical damage: Be careful when installing to avoid welding slag splashing on the bellows surface while preventing other mechanical damage.
Removal of auxiliary positioning member: Remove the auxiliary positioning members and fasteners used for installation transport as soon as possible after installation is complete.
Limit device adjustment: Adjust according to design requirements The whole limit device ensures that the pipe system has sufficient compensation capacity under environmental conditions.
Use and Maintenance
Periodic inspection: Check the status of the compensator regularly, including the integrity of the bellows, the tightness of the flange connection, etc.
Avoid overload operation: Ensure that the working conditions of the compensator do not exceed its design parameters, such as pressure, temperature, displacement, etc.
Cleaning and anti-corrosion: Keep the compensator clean and preserve if necessary, especially when used in corrosive environments.
Follow the operating manual: Carry out regular maintenance and inspection in strict compliance with manufacturer's operating manual and maintenance guidelines.
COMPLIANCE WITH REGULATIONS AND
Comply with local regulations: Ensure that the installation and use of corrugated compensator comply with local laws and regulations and industry standards, such as ASME, EN, GB and other standards.
Documentation
Save Technical Documents: Keep all relevant technical documents, including installation drawings, product instructions, test reports, etc., for future reference and maintenance.
Following the above specifications ensures that the corrugated compensator performs optimally throughout the service cycle, while reducing failure rates and maintenance costs, and ensuring stable operation of the pipeline system.